8For example, the correct distance varies according to drum length.Model DHC-1200 DHC-1600 DHC-2000 DHC-3000 Drum Length 72.7 mm 115.3 mm 146.8
9D/d Ratio The drum diameter to wire rope diameter ratio (D/d) determines the wire rope size required. Minimum hoist drum root diameter = wire
V. Operation10 Battery leads connection Before using the hoist, make sure all electrical components have no corrosion or damaged; the environ
11 Brake Adjustment Under normal use, the brake mechanism will not require any adjustment. If the brake fails to hold a load, the b
12 Maintenance Schedule 1. Ensure that a responsible person carries out all inspections as per schedule. 2. Inspections are dive
VII.Trouble Shooting13 When the hoist fails to operate after several attempts, or if there is any fault whileSymptom Possible Cause Remedy H
COMEUP INDUSTRIES INC.No.112, Nanyang St., Xizhi Dist., New Taipei City, Taiwan 22152Tel: +886-2-2694-7011 / Fax: +886-2-2694-7053Email: winch@comeu
Heavy Duty Hoist1Limited One (1) Year Warranty Comeup Industries Inc. ( COMEUP ) warrants to the original purchaser that COMEUP heavy duty hoist
Heavy Duty Hoist2 Thank you for purchasing a Hoist. This manual covers operation and maintenance of the hoist. All information
I . Safety RequirementThe operator of a hoist in some cases is required to have qualifications according to applicable laws and ordinances.Check all s
I I . Handing Precautions4Operation Precaution * To prevent the risk of electric shock, the power plug must be plugged into a matching outlet
5● It is forbidden to lift loads above the rated capacity of the hoist ● Do connect the power lead on the main power source directly and f
III. Environment Precautions6!DANGERThe following environmental conditions may result in the possible causes of hoist trouble.● Low temperature below
IV. Hoisting Principles7Load Rated Load and speed varies according to how much wire rope is on the drum. The first layer of rope on the drum
Kommentare zu diesen Handbüchern